Add articles

content/acoustic-panels.md

@@ -0,0 +1,41 @@
+Title: Theatre Acoustic Panels
+Date: 2021-10-21
+Category: Creations
+Summary: Panels for acoustic treatment in my home theatre.
+Short: 3
+
+Acoustic treatment is one of the most overlooked aspects of home audio. There's
+no point in spending money on premium speakers if the room they are playing in
+has poor acoustics.
+
+The primary purpose of acoustic panels is to reduce the reverberations caused by
+sound reflecting off the smooth walls of the theatre. The path of the reflected
+sound is a longer distance to your ear compared to the sound coming directly
+from the speaker. This causes the reflected sound to be delayed by the time it
+reaches your ear. The delayed signal interferes with itself, causing comb
+filtering which distorts the signal.
+
+Acoustic panels are placed geometrically where the sound from the speakers would
+reflect off the wall to reach the listener's ears. The insulation inside the
+panels absorbs energy from the soundwave which reduces its volume and
+interference.
+
+![twelve L-shaped corners of the panels stacked together leaning on a table saw in a wood shop]({static}/images/panel/panel1.jpg)
+
+I made six frames in the wood shop of my local makerspace, Protospace.  After
+cutting the 1x4" pine boards to length, I made a jig so I could quickly join
+them together with screws.
+
+![a panel with insulation inside on the ground about to be wrapped with black fabric]({static}/images/panel/panel2.jpg)
+
+I added 4" batts of Rockwool insulation into each frame after it was assembled.
+I then wrapped the frame with black speaker fabric and stabled it in place while
+trying to pull it taut.
+
+I sat in my theatre while a friend slid a handheld mirror along the wall until I
+could see the middle of the speaker in its reflection. This told me the centre
+point of where to mount each panel because the reflected sound would take the
+same path to my ear.
+
+<span class="aside">Four in the front, two in the back</span>
+![four black acoustic panels mounted on the walls in my home theatre]({static}/images/panel/panel3.jpg)

content/backup-strategy.md

@@ -3,6 +3,7 @@ Date: 2021-04-08
 Category: Writing
 Summary: Details about the backup system for all of my data.
 Wide: true
+Short: 1
 
 [TOC]
 
@@ -83,9 +84,8 @@ sslcacertfile = /etc/ssl/certs/ca-certificates.crt
 
 ### Notes
 
-I use Standard Notes to take notes and wrote the tool
-[standardnotes-fs](https://github.com/tannercollin/standardnotes-fs) to mount my
-notes as a file system to view and edit them as plain text files.
+I use Standard Notes to take notes and wrote the tool [standardnotes-fs](https://github.com/tannercollin/standardnotes-fs)
+to mount my notes as a file system to view and edit them as plain text files.
 
 I take weekly backups of the mounted file system on my media server with cron:
 
@@ -130,9 +130,7 @@ in case Telegram disappears or my account gets banned.
 <span class="aside">Saves the messages to a sqlite db</span>
 
 Telegram includes a data export feature, but it can't be automated. Instead I
-run the deprecated software
-[telegram-export](https://github.com/expectocode/telegram-export) hourly with
-cron:
+run the deprecated software [telegram-export](https://github.com/expectocode/telegram-export) hourly with cron:
 
 ```
 0 * * * * bash -c 'timeout 50m /home/tanner/opt/telegram-export/env/bin/python -m telegram_export' > /var/log/telegramexport.log 2>&1
@@ -143,16 +141,12 @@ Hasn't corrupted the database yet.
 
 ### Phone
 
-[Signal
-Messenger](https://play.google.com/store/apps/details?id=org.thoughtcrime.securesms&hl=en_CA&gl=US)
-automatically exports a copy of my text messages database, and
-[Aegis](https://play.google.com/store/apps/details?id=com.beemdevelopment.aegis&hl=en_CA&gl=US)
-allows me to export an encrypted JSON file of my two-factor authentication
+[Signal Messenger](https://play.google.com/store/apps/details?id=org.thoughtcrime.securesms&hl=en_CA&gl=US) automatically exports a copy of my text messages database, and
+[Aegis](https://play.google.com/store/apps/details?id=com.beemdevelopment.aegis&hl=en_CA&gl=US) allows me to export an encrypted JSON file of my two-factor authentication
 codes.
 
 I mount my phone's internal storage as a file system on my desktop using
-[adbfs-rootless](https://github.com/spion/adbfs-rootless). I then rsync the
-files over to my media server:
+[adbfs-rootless](https://github.com/spion/adbfs-rootless). I then rsync the files over to my media server:
 
 ```
 $ ./adbfs ~/mntphone 
@@ -180,9 +174,8 @@ All the files will be included in the 1 TB hard drive backup rotations.
 
 ### Web Services
 
-Web services that I run like [txt.t0.vc](https://txt.t0.vc) and
-[QotNews](https://news.t0.vc) are backed up daily, weekly, and monthly depending
-on how frequently the data changes.
+Web services that I run like [txt.t0.vc](https://txt.t0.vc) and [QotNews](https://news.t0.vc) are backed up daily, weekly,
+and monthly depending on how frequently the data changes.
 
 I run `rdiff-backup` on the remote server with cron:
 
@@ -205,11 +198,9 @@ the `rdiff-backup --server` command for security.
 
 ### Protospace
 
-I run a lot of services for [Protospace](https://protospace.ca/), my city's
-makerspace.
+I run a lot of services for [Protospace](https://protospace.ca/), my city's makerspace.
 
-The member portal I wrote called [Spaceport](https://my.protospace.ca/) creates
-an archive I download daily:
+The member portal I wrote called [Spaceport](https://my.protospace.ca/) creates an archive I download daily:
 
 ```
 40 10 * * * wget --content-disposition \
@@ -219,8 +210,7 @@ an archive I download daily:
   https://api.my.protospace.ca/backup/
 ```
 
-The website and [wiki](https://wiki.protospace.ca) that I sysadmin get
-backed up weekly:
+The website and [wiki](https://wiki.protospace.ca) that I sysadmin both get backed up weekly:
 
 ```
 0 12 * * 1 mysqldump --all-databases > /var/www/dump.sql
@@ -228,9 +218,7 @@ backed up weekly:
 20 12 * * 1 rdiff-backup /var/www pshostbak@remotebackup::/mnt/backup/remote/pshostbak/weekly/www/
 ```
 
-The Protospace [Minecraft
-server](http://games.protospace.ca:8123/?worldname=world&mapname=flat&zoom=3&x=74&y=64&z=354)
-I run gets backed up daily:
+The Protospace [Minecraft server](http://games.protospace.ca:8123/?worldname=world&mapname=flat&zoom=3&x=74&y=64&z=354) I run gets backed up daily:
 
 ```
 00 15 * * * date -Iseconds > /home/tanner/minecraft/backup_check.txt
@@ -299,14 +287,11 @@ correctly.
 ## Rotating Hard Drives
 
 I rotate through 2.5" 1 TB hard drives each Saturday when I do a backup. They
-are quite cheap at [$65 CAD](https://www.memoryexpress.com/Products/MX65194)
-each so I can have a bunch floating around.
-
+are quite cheap at [$65 CAD](https://www.memoryexpress.com/Products/MX65194) each so I can have a bunch floating around.
 
 I keep one connected to the server, one in my bag, one offsite, one at my
 mother's house, and one at my dad's house. Every Saturday I run the script above
-to take a copy and then swap the drive with the one in my bag. It then gets
-<span class="aside">I go back home about twice per year</span>
+to take a copy and then swap the drive with the one in my bag. It then gets <span class="aside">I go back home about twice per year</span>
 swapped when I visit my offsite location. Same for when I visit my parents. This
 means that all hard drives eventually get rotated through with new data and
 don't sit too long unpowered.

content/bypassing-ports.md

@@ -3,6 +3,7 @@ Date: 2021-04-10
 Category: Writing
 Summary: Bypass ISP blocked ports using VPN port forwarding for public access.
 Wide: true
+Short: 2
 
 [TOC]
 
@@ -14,16 +15,15 @@ This article explains how I set it up and is targeted towards Linux sysadmins.
 
 ## Overview
 
-I have a cheap $5 per month virtual server with [Digital
-Ocean](https://digitalocean.com) that runs Debian GNU/Linux 10. An OpenVPN
-server is running on this virtual server.
+I have a cheap $5 per month virtual server with [Digital Ocean](https://digitalocean.com) that runs
+Debian GNU/Linux 10. An OpenVPN server is running on this virtual server.
 
 My media server at home has an OpenVPN client connected to the server and is
 assigned a static IP on the VPN network.
 
 The virtual server has routing enabled and forwards inbound traffic __from the
-internet__ to my media server at home. This allows me to have external HTTP and SSH
-access.
+internet__ to my media server at home. This allows me to have external HTTP and
+SSH access.
 
 ## Server Setup
 
@@ -40,8 +40,7 @@ $ sudo apt install openvpn ufw
 
 ### OpenVPN Server
 
-These steps roughly follow [this
-guide](https://wiki.debian.org/OpenVPN#TLS-enabled_VPN).
+These steps roughly follow [this guide](https://wiki.debian.org/OpenVPN#TLS-enabled_VPN).
 
 Generate TLS certificates and keys:
 
@@ -52,7 +51,7 @@ $ sudo make-cadir easy-rsa/
 $ sudo chown -R tanner:tanner easy-rsa/
 ```
 
-Replace `tanner` with your own username, this is temporary.
+Replace `tanner` with your Linux username, this is temporary.
 
 <span class="aside">The `.rnd` file prevents a warning</span>
 
@@ -88,7 +87,8 @@ We make a `mediaserver` client because we want to assign a static IP to it. You
 need to make a different one for each client you want with a static IP.
 
 Also, if you want generic clients that all get dynamic IPs for use on your
-laptop, phone, etc. to protect you from public WiFi, create only a single extra one:
+laptop, phone, etc. to protect you from public WiFi (like a normal VPN), create
+only a single extra one:
 
 ```
 $ ./easyrsa build-client-full client nopass  # optional
@@ -135,7 +135,8 @@ $ sudo mkdir ccd
 $ sudo touch ccd/mediaserver
 ```
 
-Replace `mediaserver` with whatever client name you used above. Edit it like so:
+Replace `mediaserver` with whatever client name you used above. Edit it like
+so:
 
 <span class="aside">Your home server will be `10.8.0.100`</span>
 
@@ -220,11 +221,11 @@ COMMIT
 Replace `123.123.123.123` with your VPN server's external IP address and `eth0`
 with the external interface.
 
-This will forward TCP traffic on port 2222 to your home server. If you want to use
-port 22, then you need to set the VPN SSH server to something else.
+This will forward TCP traffic on port 2222 to your home server. If you want to
+use port 22, then you need to set the VPN SSH server to something else.
 
-A full example of `/etc/ufw/before.rules` with other ports included can be found
-here:
+A full example of `/etc/ufw/before.rules` with other ports included can be
+found here:
 
 [https://txt.t0.vc/URUG](https://txt.t0.vc/URUG)
 
@@ -247,7 +248,8 @@ $ sudo apt install openvpn
 
 ### Client Configs
 
-For static IP clients (like your home server), create the config file `/etc/openvpn/client.conf`:
+For static IP clients (like your home server), create the config file
+`/etc/openvpn/client.conf`:
 
 ```
 client
@@ -287,7 +289,8 @@ $ sudo cat /etc/openvpn/easy-rsa/pki/ca.crt
 
 Also replace `vpn.example.com` with the subdomain you assigned earlier.
 
-For device clients (like your laptop and phone), create the config file `client.ovpn`:
+For device clients (like your laptop and phone), create the config file
+`client.ovpn`:
 
 <span class="aside">`redirect-gateway def1` forces traffic over the VPN</span>
 
@@ -376,7 +379,7 @@ To add your VPN on Gnome, open VPN settings, import file, and select
 You should now be fine to access your home server from over the internet.
 
 To forward additional ports, just edit the `/etc/ufw/before.rules` file like
-above.
+above and apply the changes to `ufw`.
 
 You can now point a domain to your virtual server's IP and use that to connect
 to your home server. Use a CNAME to make it easy to change later:

content/extra/robots.txt

@@ -0,0 +1,2 @@
+User-agent: *
+Disallow:

content/garage-door-opener.md

@@ -0,0 +1,38 @@
+Title: Garage Door Opener Hack
+Date: 2021-12-26
+Category: Creations
+Summary: Hacking my garage door opener to work over Wifi.
+Short: 5
+
+In the quest to automate as much of my house as possible, I thought it would be
+useful to be able to remotely control my garage door from my home automation
+system. If I suspected that I forgot to close it while leaving, I could check in
+my security cameras and then close it from anywhere. It's nice having this peace
+of mind, even if it almost never happens.
+
+Instead of reverse engineering the wireless protocol, cracking the encryption,
+and sending my own commands, I figured it would be much easier to hack the
+hardware. I cracked open a spare remote to find that it contained a basic PCB
+with simple tactile switches.
+
+![the six parts of the spare remote on my desk: metal clip, plastic buttons, battery, PCB, and two halves of the case]({static}/images/garage/garage1.jpg)
+
+My plan was to solder an Arduino controlled relay in parallel with the button
+that toggled the garage door. I would also power the remote from the 3 V pin. I
+soldered four wires on to the appropriate pins.
+
+![a closeup of the green PCB with two wires soldered to the battery terminals and two to the button pins]({static}/images/garage/garage2.jpg)
+
+I drilled a hole in the plastic case and routed the wires through it while
+reassembling the remote. It's connected to an Adafruit ESP8266 Arduino with a
+relay module shield.
+
+The Arduino joins my isolated home automation Wifi network and connects over
+MQTT, a simple messaging protocol, to my automation server. When it receives a
+command over MQTT it toggles the relay on for a quarter of a second and then
+off, simulating a button press.
+
+![the completed system: an arduino with a white relay and wires leading to the reassembled garage door remote]({static}/images/garage/garage3.jpg)
+
+Update: this system has been flawless for two months now. It's worked every time
+I've tried to toggle the door and has never opened by mistake.

content/hand-of-ozymandias.md

@@ -1,7 +1,8 @@
 Title: Hand of Ozymandias
 Date: 2012-03-23
-Category: Projects
+Category: Creations
 Summary: A withered hand I welded out of scrap metal.
+Short: hand
 
 I was visiting my cousins in Radium, BC and decided to learn stick welding at
 their shop. I wanted to create a sculpture, so with pieces of scrap metal I

content/led-dress.md

@@ -1,7 +1,8 @@
 Title: LED Dress
 Date: 2016-03-18
-Category: Projects
+Category: Creations
 Summary: A dress made out of LEDs that twinkle like stars.
+Short: 4
 
 A friend of mine was attending a stars and constellations themed ball. She
 wanted to wear a dress that was lit up with LEDs acting as twinkling stars.

content/light-switch.md

@@ -1,7 +1,8 @@
 Title: Remote Control Light Switch
 Date: 2014-10-09
-Category: Projects
+Category: Creations
 Summary: A device to toggle my lights remotely.
+Short: remote
 
 I wanted the ability to toggle my bedroom light remotely for convenience. I
 designed a circuit that allows me to control my light with any

content/linux-flavour.md

@@ -3,6 +3,7 @@ Date: 2020-10-31
 Category: Writing
 Summary: A recommendation on which flavour of Linux to run.
 Wide: true
+Short: 6
 
 [TOC]
 
@@ -60,8 +61,8 @@ familiarity with it.
 
 Since Debian requires all its software to be free and open source, proprietary
 hardware drivers aren't included in its main repo. This can make installing
-Debian difficult if your hardware requires non-free drivers. You'll need to use
-a non-free installation image found here:
+Debian difficult if your hardware requires proprietary drivers. You'll need to use
+an installation image found here:
 
 <https://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/>
 

content/pages/creations.md

@@ -0,0 +1,6 @@
+Title: Creations
+Template: creations
+Slug: z
+
+
+Qot.

content/pages/projects.md

@@ -0,0 +1,6 @@
+Title: Projects
+Template: projects
+Slug: y
+
+
+Qot.

content/pages/writing.md

@@ -0,0 +1,6 @@
+Title: Writing
+Template: writing
+Slug: x
+
+
+Qot.

content/painting.md

@@ -1,7 +1,8 @@
-Title: Man’s Reach Exceeds His Grasp
+Title: Man's Reach Exceeds His Grasp
 Date: 2012-04-11
-Category: Projects
+Category: Creations
 Summary: My first attempt at painting with acrylic.
+Short: 7
 
 The painting is called “Man’s Reach Exceeds His Grasp”. I've always wanted to
 try painting and thought I had a good idea, so after a couple of drawings I

content/plant-waterer.md

@@ -1,7 +1,8 @@
 Title: Automatic Plant Waterer
 Date: 2014-06-05
-Category: Projects
+Category: Creations
 Summary: A device that automatically waters plants.
+short: 8
 
 One day I decided watering my one plant was too much work, so I automated it.
 It's also great for when I'm on vacation. The plant is a year old now and

content/solar-car.md

@@ -1,7 +1,8 @@
 Title: Solar Car
 Date: 2013-04-27
-Category: Projects
+Category: Creations
 Summary: About my time volunteering with the University of Calgary Solar Car Team, where I designed a maximum power point tracker.
+Short: 9
 
 I joined the University of Calgary Solar Car Team in my first semester for a
 chance to learn things, gain practical experience, and meet people that share my

content/text/air-quality.txt

@@ -0,0 +1,47 @@
+aka pollution, dust
+
+Study linking air pollution to mental disorders:
+https://www.kcl.ac.uk/news/study-supports-link-between-traffic-related-air-pollution-and-mental-disorders
+
+Calgary air quality:
+https://www.cbc.ca/news/canada/calgary/calgary-air-quality-map-ranking-1.4547149
+
+Woodgears (Matthias Wandel) page on dust:
+https://woodgears.ca/dust/dylos.html
+https://woodgears.ca/dust_collector/index.html
+
+Study of low-cost sensor accuracy:
+https://www.hindawi.com/journals/js/2018/5096540/
+
+Experiments on DIY air purifier:
+https://news.t0.vc/QZKP
+https://dyno-might.github.io/2020/12/15/some-real-data-on-a-DIY-box-fan-air-purifier/
+
+
+Sensors
+=======
+
+Fancy serial one with inlet:
+- SDS011
+- $17 USD
+https://www.aliexpress.com/item/32606349048.html
+
+One Farzad gave me:
+- DSM501A
+- $4 USD
+https://www.aliexpress.com/item/1005001710572424.html
+
+Fancy commercial one:
+- DC1100 PRO
+- $289 USD
+
+Professional fluke:
+- Fluke 985
+- $7000 CAD
+
+Good digikey one:
+- https://www.digikey.ca/en/products/detail/honeywell-sensing-and-productivity-solutions/HPMA115S0-XXX/7202204
+- connector? https://www.digikey.ca/en/products/detail/molex/0151340803/6198165 --- NO
+- cable per sensor:
+  - 4 x 900-2149211112-ND (pre-crimped lead)
+  - 1 x WM1726-ND (connector housing)

content/text/android-app-decompiling.txt

@@ -0,0 +1,44 @@
+aka hacking apk reverse engineering
+
+
+Guides:
+
+https://blog.securityevaluators.com/how-to-view-tls-traffic-in-androids-logs-6a42ca7a6e55
+https://archive.ph/zDaV6
+- used during Lutron hacking
+
+Tools:
+$ sudo apt install adb apktool openjdk-11-jdk-headless zipalign
+$ locate apktool
+- replace apktool with new version:
+- https://github.com/iBotPeaches/Apktool/releases
+$ sudo mv /usr/share/apktool/apktool.jar /usr/share/apktool/apktool.jar.orig
+$ sudo mv ~/Downloads/apktool_2.5.0.jar /usr/share/apktool/apktool.jar
+
+
+Get APK file:
+- find name of the app
+$ adb shell pm list packages | grep covid
+- find path of the app
+$ adb shell pm path ca.ab.gov.covidrecordsverifier
+- pull the apk
+$ adb pull [path] .
+
+Decompile:
+$ apktool d application.apk -o output/
+
+Compile:
+$ apktool b output/ --use-aapt2 -o patched.apk
+
+Sign:
+- the following just once:
+$ keytool -genkey -v -keystore release.keystore -alias alias_name -keyalg RSA -keysize 2048 -validity 10000
+$ jarsigner -verbose -sigalg SHA1withRSA -digestalg SHA1 -keystore release.keystore patched.apk alias_name
+
+Install:
+$ adb install patched.apk
+
+Read logs:
+$ adb logcat -c
+
+

content/text/anti-aging.txt

@@ -0,0 +1,67 @@
+Slowing Aging
+=============
+
+- Avoid DNA damage (wear sunscreen)
+- Eat less - caloric restriction
+- Eat less protein
+- Do exercise (HIIT)
+- Be cold
+- Be hot
+
+... these trigger longevity genes to trick body into preserving genome
+
+
+Reversing aging
+===============
+
+Theory
+------
+
+- Shinya Yamanaka discovered 4 factors that reset epigenome of cell back to pluriportent stem cell
+  - Myc, Oct3/4, Sox2 and Klf4
+  - dont do it all, would turn into tumor
+  - suggests there are ways to revert cells and reverse ageing
+- David Sinclar's lab reversed aging in old mice so they could see like they were young again
+  - used 3/4 of the reprogramming factors, not Myc as causes cancer
+  - can turn system on and off to limit reversal
+
+
+Resources
+=========
+
+- Veratasium How to Slow Aging:
+https://www.youtube.com/watch?v=QRt7LjqJ45k
+
+- JRE David Sinclair #1:
+https://www.youtube.com/watch?v=HOTS0HS7aq4
+
+Notes:
+Calorie restriction, mostly vegetarian diet, avoid sugar and carbs. 
+On weekends, he exercises at the gym and then sits in a hot sauna before plunging himself into an ice-cold pool, as well as tracks his biomarkers regularly.
+Takes vitamin D, vitamin K2, and aspirin. 
+Takes each morning: resveratrol, NMN, and metformin
+
+- JRE David Sinclair #2:
+https://www.youtube.com/watch?v=ZGLL77wYxe8
+
+0:00 The new book, resveratrol
+7:00 NMN and NAD+, metformin and exercise
+18:00 Sinclair’s family went on a safari
+48:30 back to the anti-aging book, longevity
+52:20 Sinclair’s healthy 80 year old father: “He’s fitter than me”, his rebel grandmother
+1:10:00 intermittent fasting
+1:15:50 I.V. NAD+
+1:18:00 nutrition, yogurt and other food
+1:32:00 resveratrol, colorful foods
+1:41:00 sleep
+1:45:40 what should people be doing? (Sinclair is wrong about airport scanners)
+1:48:25 NMN and NR online
+1:50:25 CRISPR/ genetic engineering
+2:08:00 blood rejuvenation
+2:12:50 what is on the horizon? senescence cells, “We’ve learned how to fly…”
+
+- Age reduction breakthrough:
+https://joshmitteldorf.scienceblog.com/2020/05/11/age-reduction-breakthrough/
+
+- Yamanaka paper:
+https://www.cell.com/fulltext/S0092-8674(06)00976-7

content/text/design.txt

@@ -0,0 +1,127 @@
+UI / UX
+=======
+
+Principals:
+https://news.t0.vc/EKUD/c#punnerud1596400621
+
+Little details:
+https://littlebigdetails.com/
+
+Choosing a colour palette:
+https://refactoringui.com/previews/building-your-color-palette/
+
+What not to do:
+https://annoying.technology/
+https://grumpy.website/
+
+
+Web Design / Inspo
+==================
+
+https://breakermag.com/trapped-at-sea-with-cryptos-nouveau-riche/
+- Good mobile site, very clean and just works
+
+https://www.maxhallinan.com/posts/2018/12/07/little-languages/
+- Good, simple blog. Lacks an image-first menu though.
+
+https://taimur.me/posts/notes-from-malcolm-gladwell-s-writing-masterclass-part-1
+- Another left-aligned simple blog
+
+http://haya2now.jp/en.html
+- Cool dashboard UI for japanese space probe
+
+https://wiki.xxiivv.com/#devine+lu+linvega
+- Devine Lu Linvega: Some portfolio of a designer that makes and uses lots of tools and systems
+
+https://maki.cat
+- css / html god that's into japanese culture and cute things
+
+https://www.thecut.com/2019/05/how-scammers-trick-people-into-thinking-theyre-wealthy.html
+- very sexy clean cut news website
+
+https://techcrunch.com/2019/05/06/windows-gets-a-new-terminal/
+- clean blog post
+
+https://wattenberger.com/
+- she does lots of stuff
+
+https://devonzuegel.github.io/
+- also does lots of stuff, cool projects, notes
+
+http://nolannicholson.com/index.html
+- dead simple portfolio website. perfect, maybe just add images
+- this might have changed?
+
+https://vim.reversed.top/
+- card like interface
+
+https://simplenote.com/
+- great product website
+
+https://www.gwern.net/index
+- latex looking site, guy does a lot of stuff
+
+https://caro.io/
+- good folio site with squares like what I wanted
+
+https://markosaric.com/
+- marketing guy that has a nice dark mode theme
+- this guy tricked me into reading an ad: https://news.t0.vc/VBHA blew up on HN
+
+https://anders.unix.se/
+- very clean readable website
+
+https://schollz.com
+- also simple website with projects and blog. guy does a lot, very inspiring
+
+https://www.unwoke.hr
+- great design for job board
+
+https://ciechanow.ski/archives/
+- very informative blog with clean demos
+
+https://mazaj.ca
+- odai's friend arabic coffee website
+- beautiful design, graphics, and business plan
+
+https://www.brandur.org/articles
+- sexy clean articles
+
+https://secret.club/2021/05/13/source-engine-rce-join.html
+- great blog design
+
+https://www.munichre.com
+- nice official business looking site
+
+
+Motherfucking websites:
+https://motherfuckingwebsite.com/
+http://bettermotherfuckingwebsite.com/
+https://perfectmotherfuckingwebsite.com/
+https://thebestmotherfucking.website/
+https://bestmotherfucking.website/
+https://evenbettermotherfucking.website/
+
+https://inconvergent.net/
+https://img.inconvergent.net/generative/78b7266.html
+- cool artist's minimalistic site
+
+Crazy websites:
+- https://news.t0.vc/EYHQ (list)
+- https://www.kickscondor.com/
+- https://yvettesbridalformal.p1r8.net/
+
+
+Colors:
+
+Nice colors:
+- #83a8f3 (close to cornflower blue)
+
+
+Fonts
+=====
+
+Baskerville:
+https://fonts.google.com/specimen/Libre+Baskerville#pairings
+- NYT study said it was best?
+

content/text/dsp-sdr.txt

@@ -0,0 +1,19 @@
+aka Signal Conditioning, software defined radio, gnu radio, rtl-sdr
+
+Good intro:
+http://pyageng.mpastell.com/book/dsp.html
+http://pyageng.mpastell.com/book/sampling.html#cid7
+
+Textbook list:
+https://dspguru.com/dsp/books/favorites/
+
+DSP Guide:
+http://www.dspguide.com/
+
+GNU Radio cookbook:
+https://cdn.hackaday.io/files/1648847054397056/GRC%20Cook%20Book.pdf
+
+SDR assignments:
+https://greatscottgadgets.com/sdr/
+
+

content/text/esp8266.txt

@@ -0,0 +1,28 @@
+Datasheet:
+https://www.espressif.com/sites/default/files/documentation/0a-esp8266ex_datasheet_en.pdf
+Tech Reference:
+https://www.espressif.com/sites/default/files/documentation/esp8266-technical_reference_en.pdf
+PCB Design Guidelines:
+https://www.espressif.com/sites/default/files/documentation/esp8266_hardware_design_guidelines_en.pdf
+
+Pins
+====
+
+Multiplexing analog input:
+https://internetofhomethings.com/homethings/?p=530
+
+Digital:
+- has hysterisis
+- Vil = 0.25 * Vin
+- Vih = 0.75 * Vin
+
+ADC:
+- only 1 analog pin, A0
+- 10 bits, 0-1023
+- only supports 0.2 - 1.2 V, unless there's on-board voltage divider
+
+
+WeMos D1 Mini
+=============
+
+- has on board 3V3 ADC divider

content/text/linux.txt

@@ -0,0 +1,249 @@
+Enter today's date in ISO format:
+$ date -I
+To include seconds:
+$ date -Is
+
+Ping scan subnet (find a Raspberry Pi):
+$ nmap -sn 192.168.0.0/24
+Port 22 scan subnet:
+$ nmap -sS -p 22 192.168.10.0/24
+- run as root to get device names
+
+To SCP with spaces in path, escape the spaces and surround the whole arg with quotes.
+
+Serial Terminal:
+Minicom /dev/ttyACM0 115200 8N1 w/ Hardware flow control: yes works.
+If not, send Break (ctrl-a F).
+To enable on server side (systemd):
+$ systemctl enable serial-getty@ttyS0.service
+$ systemctl start serial-getty@ttyS0.service
+
+How to list wifi networks:
+$ sudo iw dev wlp58s0 scan
+
+Show top 10 edited files in git repo:
+$ git log --pretty=format: --name-only | sort | uniq -c | sort -rg | head -10
+
+Recursively hash directory, then hash result:
+$ md5deep -rl . | sort | md5sum
+
+Redirect stderr to stdout and pipe: |&
+Redirect stderr to stdout: 2>&1 (do it after)
+
+Copy torrent but use hardlinks instead:
+$ cp -al source dest
+
+Byobu tmux toggle function keys:
+Shift + F12
+- do this if Alt+Arrow is letters
+
+Get rid of extra byobu sessions:
+$ tmux ls | grep ^_ | cut -f1 "-d:" | xargs -t -L1 -r tmux kill-session -t
+
+Make a PDF look scanned:
+$ convert "$1" -alpha Off -density 150 -colorspace gray -blur 0.5x0.5 -rotate 0.4 -level 40%,60% "scanned-$1"
+
+Insert last arg: alt+.
+Insert 2nd last arg: alt+_ alt+.
+Insert 3rd last arg: alt+_ 2 alt+.
+
+SSH reverse tunnel router admin:
+$ ssh -L 2222:192.168.0.1:80 user@10.9.0.3
+- open localhost:2222 in browser
+
+Select a display over ssh:
+$ export DISPLAY=:1
+
+Spawn new shell with group assignments:
+$ exec su -l $USER
+
+xargs:
+- converts stdin to arguments for commands that dont accept stdin
+- used with echo, compacts a list to one line
+- see each command xargs runs: --verbose
+- dont run if stdin is empty: -r
+- run command once per line: -L1
+- convert stdin to argument:
+$ echo 'foo' | xargs mkdir
+- convert list to one line:
+$ cat foo.txt | xargs echo
+- run a command for each line:
+$ cat foo.txt | xargs -L0 --verbose echo
+
+
+Systemd
+=======
+
+Journalctl
+----------
+
+Examples:
+$ journalctl --utc
+$ journalctl -b  # display logs since boot
+$ journalctl --since "2015-01-10" --until "2015-01-11 03:00"
+$ journalctl --since 09:00 --until "1 hour ago"
+$ journalctl -u nginx.service -u php-fpm.service --since today
+
+
+Bash scripting
+==============
+
+Always quote variables when you use them.
+Run set -eu to crash when on errors and when using unset variables.
+Use basedir to just get filename.
+
+Gpg sign, encrypt, and armour:
+gpg -sear [NAME]
+
+Get window's handle with xdotool:
+xdotool search --name "Google Play"
+
+Get window's position and size with xdotool:
+xdotool getwindowgeometry 44047673
+Subtract 10 from the Y position, and 82 from the Y
+
+
+Keyboard Shortcuts
+==================
+
+Focus Keepass, Super+Z: bash /home/tanner/scripts/focuskeepass.sh
+Arrange Desktop, Super+X: /home/tanner/scripts/arrangedesktop.sh
+Home Controller: Super+C: /home/tanner/scripts/homecontroller.sh
+Toggle light 0, Super+1: /home/tanner/scripts/homecontroller.sh 0
+Open terminal, Super+T: xfce4-terminal
+Rofi, Super+`: rofi -combi-modi window,run -show combi -normal-window
+
+** set "switch windows" to alt-tab to make it normal
+
+Make right alt normal:
+- tweak tool > keyboard & mouse > Additional Layout Options button
+- expand "Key to choose 3rd level"
+- deselect Right Alt
+
+
+Nginx
+=====
+
+Log rotate /etc/logrotate.d/nginx:
+    size 100M
+    missingok
+    rotate 20
+    compress
+    delaycompress
+    notifempty
+    create 0640 www-data adm
+
+Logging /etc/nginx/nginx.conf:
+    # Make sure to copy the GeoIP files!
+    geoip_country /usr/share/GeoIP/GeoIP.dat;
+    geoip_city /usr/share/GeoIP/GeoIPCity.dat;
+    log_format tannersformat '[$time_iso8601] $remote_addr ($geoip_city, $geoip_country_code) $request_method "$server_name$request_uri" $status "$http_referer" "$http_user_agent"';
+    access_log /var/log/nginx/access.log tannersformat;
+    error_log /var/log/nginx/error.log;
+
+$ wget https://t0.vc/f/GeoIPCity.dat
+$ sudo mv GeoIPCity.dat /usr/share/GeoIP/GeoIPCity.dat
+
+
+OpenVPN
+=======
+
+Setup:
+$ sudo su root
+- follow steps here:
+- https://wiki.debian.org/OpenVPN#TLS-enabled_VPN
+  - skip editing vars
+  - add random data to /etc/openvpn/easy-rsa/pki/.rnd to get rid of error messages
+  - use the # ./easyrsa [command] methods
+  - encrypt CA with password
+  - build the optional intermediate CA
+- https://wiki.debian.org/OpenVPN#Static-Key_VPN
+  - improves security
+- set auth SHA256
+- save config file to /etc/openvpn/server.conf
+- * set root's shell back to /bin/false *
+
+Static IP:
+- create a client (ie. "mediaserver") with easyrsa
+$ mkdir /etc/openvpn/ccd
+- edit /etc/openvpn/ccd/mediaserver:
+ifconfig-push 10.8.0.100 255.255.255.0
+- edit /etc/openvpn/server.conf:
+client-config-dir /etc/openvpn/ccd
+
+Routing / port forward:
+- edit /etc/sysctl.conf:
+net.ipv4.ip_forward=1
+- edit /etc/default/ufw:
+DEFAULT_FORWARD_POLICY="ACCEPT" 
+- edit /etc/ufw/before.rules at the top:
+*nat
+:POSTROUTING ACCEPT [0:0]
+# ssh port forwarding
+-A PREROUTING -d 159.203.223.101 -p tcp --dport 43655 -j DNAT --to-dest 10.8.0.100:43655
+-A POSTROUTING -d 10.8.0.100 -p tcp --dport 43655 -j SNAT --to-source 10.8.0.1
+# Allow traffic from OpenVPN client to eth0
+-A POSTROUTING -s 10.8.0.0/8 -o eth0 -j MASQUERADE
+COMMIT
+$ sudo ufw disable && sudo ufw enable
+$ sudo sysctl net.ipv4.ip_forward=1
+- source: https://gist.github.com/kimus/9315140
+
+Systemd fix:
+- ensure config file is at /etc/openvpn/server.conf
+$ sudo systemctl start openvpn@server
+$ sudo systemctl enable openvpn@client
+$ sudo systemctl daemon-reload
+$ sudo service openvpn restart
+- verify stop / start with ps aux | grep openvpn
+- do same for "client"
+- source: https://ubuntu.com/server/docs/service-openvpn
+
+Systemd client:
+$ sudo mv vpn2-client.ovpn /etc/openvpn/client.conf
+$ sudo chown root:root /etc/openvpn/client.conf
+$ sudo chmod 600 /etc/openvpn/client.conf
+- if there's a password:
+$ sudo -E vim /etc/openvpn/auth.txt
+$ sudo chmod 600 /etc/openvpn/auth.txt
+- add password to file
+- add "askpass /etc/openvpn/auth.txt" to config file
+- set up systemd:
+$ sudo systemctl start openvpn@client
+$ sudo systemctl enable openvpn@client
+$ sudo systemctl daemon-reload
+$ sudo service openvpn restart
+
+Disable routing traffic over VPN:
+- remove all "redirect-gateway" lines in client config
+
+Gnome client:
+- vpn settings, add
+- import from file, select vpn2-client.ovpn
+- add missing private key from /home/tanner/.cert/nm-openvpn/
+- add password gush-tilt-shine-chute-pace-gecko
+
+
+New Desktop
+-----------
+
+$ sudo apt install git tree htop byobu unattended-upgrades curl axel man-db vim vim-gtk netcat xfce4-terminal firefox chromium keepassxc mpv network-manager-openvpn-gnome bash-completion xdotool mlocate ncdu
+$ sudo apt remove firefox-esr
+- set up home directory...
+
+Firefox extentions:
+- Cookie AutoDelete
+- Decentraleyes
+- HTTPS Everywhere
+- I dont care about cookies
+- New Tab Override
+- NoScript
+- Privacy Badger
+- SponsorBlock
+- uBlock Origin
+
+Fix popping after audio stops (disable audio power save):
+$ sudo bash -c 'echo 0 > /sys/module/snd_hda_intel/parameters/power_save'
+- to persist append to /etc/modprobe.d/audio_disable_powersave.conf:
+options snd_hda_intel power_save=0
+

content/text/meditation.txt

@@ -0,0 +1,41 @@
+Notes from Andy
+---------------
+
+Mastering your mind:
+- can you control yourself?
+- can you sit still physically?
+- can you control your mind?
+  - can you concentrate on a simple object and nothing else?
+  - can you have no thoughts?
+    - can you free your mind from remembering the past or future?
+    - can you have no visual images / sounds?
+    - can you stop your inner monologue?
+
+
+How to meditate:
+- these steps are very gradual, not distinct steps:
+- master focusing in the present (1-2 years)
+  - disregard the past and future
+  - focus on noises in the present. can jump around or listen to all.
+  - on failure gently pull back to the present
+  - mastery when you can do this for an hour
+  - can start with shorter sessions
+- master focusing only a single element in the present
+  - for example, your breath
+- master stopping the monologue
+  - stop talking to yourself
+  - stop making comments
+  - stop the chatter
+- master total absorption into that single element
+  - deeper focus into the element
+- Samadhi state
+  - can only experience your own, dont read the wiki
+  - Andy reached this only once, he felt omnipotent
+
+- this becomes an intrinsic skill like talking and walking rather than a motor skill like throwing?
+- if you dont use it you lose it?
+- one you reach Samadhi your mind always meditates
+
+
+Naval theory:
+https://twitter.com/naval/status/1261481222359801856

content/text/note-taking.txt

@@ -0,0 +1,170 @@
+aka notetaking
+
+Solutions
+=========
+
+Desires
+-------
+
+- Open source
+- End to end encryption
+- Portable data store - md (or exportable)
+- Images
+- Rich text editor WYSIWYG
+- Linking notes together
+  - to whole note or header in note
+- Sync
+- Mobile support
+- Folders
+- Undo / versioning
+
+
+Reviews
+-------
+
+Joplin:
+- UI is very fast
+- has its own sync server now, wait to mature?
+- scroll in render view glitchy / laggy when zoomed
+- WYSIWYG editor breaks some markdown
+- clicking links in WYSIWYG requires ctrl
+- can't see note names in notebook tree, so will be hard to find
+  - maybe that's better?
+- mobile app lacks WYSIWYG
+- mobile app md editor scroll shitty
+- slow to edit notes in mobile app
+- white flashes on dark mode desktop theme when switching notebooks
+- Todo feature is cool. can make each note a todo and use the body to add context / info
+  - easy to rearrange todos
+
+Obsidian:
+- highly reviewed, looks sexy but needs more contrast
+- no WYSIWYG editor yet - planned
+- has graph and backlinks
+- not open source
+- files stored as plain text
+
+
+Wiki.js:
+- Supports LaTeX
+- Support Markdown (it also supports formats such as html)
+- Works in-browser (and therefore can be accessed on any device)
+- Editing is easy (although this sounds like a "duh" feature, many self-hosted note apps are more like static site generators)
+- Uploading files is simple
+- Has multiple backup options (I use GitHub and .gitignore the textbooks)
+
+
+Boostnote:
+- no mobile support
+
+Trilium:
+- great encryption
+- poor mobile support, Dom uses telegram as a buffer
+- fully tried it, mobile is just too broken
+  - doesnt scroll all the way to the bottom of folders and note contents
+- lots of other minor bugs
+  - parts of UI not updating like archived notes
+  - randomly refreshes the page
+  - header sizes all look the same
+  - today note button is slow to load
+
+Simplenote:
+- not self-hosted
+- no folders
+
+Turtl:
+- buggy app
+- bad organization system
+
+Org-mode
+- needs emacs
+
+Taskwarrior:
+- command line only
+
+Zim:
+- no built in sync
+- no mobile
+
+TiddlyWiki
+- no built in sync
+- one html file
+- modern browsers block some file features?
+
+https://collectednotes.com/
+- no android
+- watch them
+
+https://github.com/athensresearch/athens
+- not finished, keep an eye on
+- ugly theme
+
+Outline:
+- https://www.getoutline.com/
+
+
+
+Zenkit: proprietary
+OneNote: proprietary
+Google Keep: proprietary
+Synapbook: proprietary
+Workflowy: proprietary
+Notion: proprietary, UX issues: https://news.t0.vc/DCGM
+Roam Research: proprietary, cool graph feature though
+RemNote: proprietary, spaced repetition
+
+
+https://contexted.io/
+https://rwtxt.com
+
+Stuff to read:
+https://news.t0.vc/YUAT/c
+https://news.t0.vc/WLJJ/c
+https://news.t0.vc/ORXL/c
+https://old.reddit.com/r/CGPGrey/comments/ihkqjp/cortex_105_atomic_notes/
+
+
+The perfect note-taking app:
+https://www.youtube.com/watch?v=wpcVQeF07G4
+- goes over the three types of note-takers
+- librarian: likes to catalogue, usually write-only -> evernote
+- gardener: likes connecting ideas in their own way -> roam
+- architect: likes designing processes and structure -> notion
+
+
+Formatting / Template
+=====================
+
+Unformatted info can just be sentences, paragraphs, or points.
+
+
+Section
+=======
+
+Place two empty lines before the section header, empty line after
+
+
+Subsection
+-----------
+
+Sub-subsection:
+No linebreak for text within a section
+
+Generic lists or steps:
+- dash then a space
+- lower case for prose
+- Data points: gets capital
+- like this
+  - sublists
+  - two spaces, dash, space
+
+Todo lists:
+o unfinished task
+v finished task (looks like check mark)
+x cancelled task
+
+- I wonder if I should just use markdown?
+
+* notes to consider
+$ commands to run
+

content/text/python.txt

@@ -0,0 +1,39 @@
+Development Setup:
+$ sudo apt install python3 python3-pip python-virtualenv python3-virtualenv
+$ virtualenv -p python3 env
+$ . env/bin/activate
+$ pip install -r requirements.txt
+
+Django clone setup:
+$ python manage.py makemigrations
+$ python manage.py migrate
+$ python manage.py createsuperuser
+$ DEBUG=true python manage.py runserver 0.0.0.0:8000
+
+
+Logging:
+
+use logger.exception
+
+Machine learning:
+comma.ai switched to pyTorch
+
+
+How to make a package:
+https://news.t0.vc/ZBPS
+
+
+Timezones
+=========
+
+NEVER USE .replace(tzinfo= EXCEPT FOR WITH UTC!
+
+Assigning timezone to parsed string:
+- example, you get a text timestamp and parse it with strptime
+- solution:
+t = datetime.strptime(timestamp, '%Y-%m-%d %H:%M:%S')
+tz = pytz.timezone('America/Edmonton')
+result = tz.localize(t)
+
+
+

content/text/spain-portugal.txt

@@ -0,0 +1,70 @@
+Barcelona:
+- very touristy
+
+Tarragona:
+- 20 minutes south of Barcelona
+- much cheaper and more historical
+- Roman ruins are still there
+- very close to the ocean
+- lots of walking
+- Tim stayed at Olivia hotel
+  - 100 m from Mediterranian
+  - right on the giant town plaza
+- Amphithéâtre, Aqueducts, walls
+
+Cervera:
+- 25200 Lleida 
+- Tim's wife taught
+- zero english
+- train goes from Barcelona
+- crazy festivals every ten days:
+https://www.youtube.com/watch?v=kr03rCwa9ms
+
+Malaga:
+- city with the most soul
+- nice beaches
+- poorer
+
+Granada:
+- **alhambra: palace of the largest islamic empire, book ahead
+- alkazah
+
+*Alhambra:
+- 'Remember to be punctual to access the Nasrid Palaces at the time selected on your ticket. The rest of the monument can be visited from 8:30 a.m. to 6:00 p.m. winter; 8:30 a.m. to 8:00 p.m. summer.'
+- random document number 10L-ID10T
+- Booking Reference Number: H0DIOBJ
+
+Valencia:
+- good flee market
+
+Seville:
+- odai's friend owns restaurant
+- alcazar
+- plaza de espana
+- opera?
+- Diego Velázquez birthplace?
+
+
+Portugal
+========
+
+Lagos:
+- Brassao restaurant very good
+- sunset
+
+Lisbon:
+- a bit dirty
+- have low expectations
+
+Sintra:
+- look like disney
+- actual castle
+- 45 min train from Lisbon
+
+Porto:
+- beautiful
+- odai like better than lisbon
+- on a cliffside
+- where harry potter started
+
+

content/text/vim-tricks.txt

@@ -0,0 +1,34 @@
+Enter word under cursor into cmdline:
+CTRL-R CTRL-W
+(:help c_CTRL-R)
+
+Rewrap text (reformat):
+gq
+
+Remove duplicates from file:
+vim ~/.ssh/authorized_keys +":sort u|wq"
+
+N ctrl-^ goes to buffer N
+
+Centre current line on screen:
+zz
+
+Newrw:
+- fixed on left: :20Lexplore
+- change to tree: i
+- toggle .hidden files: gh
+
+
+
+Config
+======
+
+Start Vim without reading .vimrc:
+vim -u NONE
+
+Minimal sane config:
+set encoding=utf-8
+set nocompatible
+set background=dark
+set hidden
+

content/wine-crate-coffee-table.md

@@ -0,0 +1,28 @@
+Title: Wine Crate Coffee Table
+Date: 2018-09-12
+Category: Creations
+Summary: A coffee table made out of wooden wine creates.
+Short: 0
+
+My close friend Odai saw a simple coffee table design online that was built out
+of four wooden wine crates. They are quite cheap and available at any hardware
+store. We each wanted to make one so went and bought eight crates and some
+plywood to use as a base.
+
+We went to my local makerspace, Protospace, to build them in the wood shop. We
+thought it would be a quick job only taking a few hours, but it turned out to be
+a twelve hour job over a couple of days. At least we were in good company!
+
+![the table before staining. four box-like wine crates are on their sides and joined together in a spiral. a messy wood shop is in the background]({static}/images/wine/wine1.jpg)
+
+![the two tables after staining. one face is centred and the contrast between the dark stain and light wood grain shows.]({static}/images/wine/wine2.jpg)
+
+The wine crates were glued and then brad-nailed together. Extra wood was added
+under the thin top strips for support. After the glue dried, the brad nails were
+painstakingly removed because the ones we used were too long and stuck out.
+
+After being attached to the base, the entire table was sanded and then stained.
+We let it dry overnight and returned the following day to add a quick layer of
+varnish.
+
+![the table in my living room with blankets inside the wine crates and a plant pot in the centre growing a bonsai tree and a succulent]({static}/images/wine/wine3.jpg)

pelicanconf_lite.py

@@ -0,0 +1,69 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*- #
+from __future__ import unicode_literals
+import os
+
+AUTHOR = 'Tanner Collin'
+SITENAME = 'Tanner Collin'
+SITEURL = ''
+
+PATH = 'content'
+
+TIMEZONE = 'Canada/Mountain'
+
+DEFAULT_LANG = 'en'
+
+# Feed generation is usually not desired when developing
+FEED_ALL_ATOM = None
+CATEGORY_FEED_ATOM = None
+TRANSLATION_FEED_ATOM = None
+AUTHOR_FEED_ATOM = None
+AUTHOR_FEED_RSS = None
+
+DEFAULT_PAGINATION = False
+
+MARKDOWN = {
+    'extension_configs': {
+        'markdown.extensions.codehilite': {'css_class': 'highlight'},
+        'markdown.extensions.extra': {},
+        'markdown.extensions.meta': {},
+        'markdown.extensions.toc': {
+            'toc_depth': '2-3',
+            'anchorlink': True,
+        },
+    },
+    'output_format': 'html5',
+}
+
+STATIC_PATHS = ['images', 'extra']
+
+EXTRA_PATH_METADATA = {
+    #'extra/favicon.svg': {'path': 'favicon.svg'},
+}
+
+# Uncomment following line if you want document-relative URLs when developing
+#RELATIVE_URLS = True
+
+THEME = 'themes/lite'
+
+# turn off useless outputs
+TAG_SAVE_AS = ''
+CATEGORY_SAVE_AS = ''
+AUTHOR_SAVE_AS = ''
+ARCHIVES_SAVE_AS = ''
+AUTHORS_SAVE_AS = ''
+CATEGORIES_SAVE_AS = ''
+TAGS_SAVE_AS = ''
+
+INDEX_SAVE_AS = 'index.html'
+ARTICLE_URL = '{short}/'
+ARTICLE_SAVE_AS = '{short}/index.html'
+PAGE_URL = '{slug}'
+PAGE_SAVE_AS = '{slug}/index.html'
+
+def list_text_files():
+    return sorted(os.listdir('./content/text'))
+
+JINJA_GLOBALS = {'list_text_files': list_text_files}
+
+PROD = False

prototype.html

@@ -0,0 +1,17 @@
+<style>
+body {background: #eee; font: 1.1rem/1.5 serif;}
+h1, h2 {margin-left: -24; font-family: sans-serif;}
+a {text-decoration: none; color: #000; border-bottom: 1px solid #000;}
+</style>
+<div style="max-width: 600; margin: auto">
+	<h1>Tanner Collin</h1>
+	<p> Hi, I'm Tanner! I do firmware and web development in Calgary.</p>
+	<a href="/">Contact</a> |
+	<a href="/r">Resume</a> |
+	<a href="/p">Projects</a> |
+	<a href="/c">Creations</a> |
+	<a href="/w">Writing</a>
+	<h2>Contact Info</h2>
+	<p>Email: <a href="mailto:site2@tannercollin.com">site2@tannercollin.com</a></p>
+	<p>Telegram: <a href="https://t.me/tannercollin">@tannercollin</a></p>
+</div>

publishconf_lite.py

@@ -0,0 +1,69 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*- #
+from __future__ import unicode_literals
+import os
+
+AUTHOR = 'Tanner Collin'
+SITENAME = 'Tanner Collin'
+SITEURL = ''
+
+PATH = 'content'
+
+TIMEZONE = 'Canada/Mountain'
+
+DEFAULT_LANG = 'en'
+
+# Feed generation is usually not desired when developing
+FEED_ALL_ATOM = None
+CATEGORY_FEED_ATOM = None
+TRANSLATION_FEED_ATOM = None
+AUTHOR_FEED_ATOM = None
+AUTHOR_FEED_RSS = None
+
+DEFAULT_PAGINATION = False
+
+MARKDOWN = {
+    'extension_configs': {
+        'markdown.extensions.codehilite': {'css_class': 'highlight'},
+        'markdown.extensions.extra': {},
+        'markdown.extensions.meta': {},
+        'markdown.extensions.toc': {
+            'toc_depth': '2-3',
+            'anchorlink': True,
+        },
+    },
+    'output_format': 'html5',
+}
+
+STATIC_PATHS = ['images', 'extra', 'text']
+
+EXTRA_PATH_METADATA = {
+    #'extra/favicon.svg': {'path': 'favicon.svg'},
+}
+
+# Uncomment following line if you want document-relative URLs when developing
+#RELATIVE_URLS = True
+
+THEME = 'themes/lite'
+
+# turn off useless outputs
+TAG_SAVE_AS = ''
+CATEGORY_SAVE_AS = ''
+AUTHOR_SAVE_AS = ''
+ARCHIVES_SAVE_AS = ''
+AUTHORS_SAVE_AS = ''
+CATEGORIES_SAVE_AS = ''
+TAGS_SAVE_AS = ''
+
+INDEX_SAVE_AS = 'index.html'
+ARTICLE_URL = '{short}/'
+ARTICLE_SAVE_AS = '{short}/index.html'
+PAGE_URL = '{slug}'
+PAGE_SAVE_AS = '{slug}/index.html'
+
+def list_text_files():
+    return sorted(os.listdir('./content/text'))
+
+JINJA_GLOBALS = {'list_text_files': list_text_files}
+
+PROD = True

themes/lite/templates/article.html

@@ -0,0 +1,45 @@
+{% extends "base.html" %}
+{% block meta %}
+<meta charset=UTF-8>
+{% endblock %}
+
+{% block style %}
+
+<style>
+p, h2, h3, h4, h5 {
+	margin: 0;
+}
+.toclink {
+	color: black;
+}
+.highlight > pre {
+	margin: 0;
+	padding: 0.5rem;
+	overflow-x: auto;
+	background-color: #eee;
+}
+:not(pre)>code {
+	padding: 0 2px;
+	font-size: 0.8rem;
+	background-color: #eee;
+}
+.aside {
+	display: none;
+}
+.toc {
+	display: none;
+}
+img {
+	width: 600px;
+	height: auto;
+}
+</style>
+{% endblock %}
+
+{% block content %}
+<h1>{{ article.title }}</h1>
+{{ article.summary }}
+{{ article.locale_date }}
+<hr />
+{{ article.content }}
+{% endblock %}

themes/lite/templates/base.html

@@ -0,0 +1,2 @@
+{% block meta %}{% endblock %}<link rel=icon href=data:,>{% block style %}{% endblock %}<pre>{% block content %}
+{% endblock %}

themes/lite/templates/creations.html

@@ -0,0 +1,21 @@
+{% extends "base.html" %}
+{% block meta %}
+{% endblock %}
+
+{% block style %}
+{% endblock %}
+
+{% block content %}
+Creations
+=========
+
+Sometimes I create art or interactive tech.
+
+{% for article in articles if article.category.name == 'Creations' %}
+<a href="/{{ article.url }}">{{ article.title }}</a>
+    {{ article.summary | striptags }}
+
+{% endfor %}
+
+{% endblock %}
+

themes/lite/templates/index.html

@@ -0,0 +1,44 @@
+{% extends "base.html" %}
+{% block content %}
+Hi, I'm Tanner! I like home automation, privacy, bots,
+Python, <a href=d>sensors</a>, Debian, coffee, and makerspaces.
+
+Please sign my <a href=g>Guest Book</a>!
+
+Email: site3@tannercollin.com
+Telegram: @tannercollin
+
+Resume
+
+Firmware Engineer at Cabana Blockchain, 2018-
+Lead Hardware Engineer at Critical Control, 2016-2018
+Electrical Engineer at Opener Aero, 2016-2016
+Electrical Engineer Intern at Pason Systems, 2014-2015
+BSc. Electrical Engineering from University of Calgary
+
+Projects
+
+<a href=q>QotNews*
+<a href=n>Notica*
+<a href=m>Spaceport*
+<a href=t>t0txt*
+<a href=y>[more]</a>
+
+* external link
+
+Creations
+
+{% for article in articles_page.object_list if article.category.name == 'Creations' %}
+{% if loop.index <= 4 %}
+<a href={{ article.url }}>{{ article.title }}
+{% endif %}
+{% endfor %}
+<a href=z>[more]
+</a>
+Writing
+
+{% for article in articles_page.object_list if article.category.name == 'Writing' %}
+<a href={{ article.url }}>{{ article.title }}
+{% endfor %}
+<a href=x>[more]
+{% endblock %}

themes/lite/templates/page.html

@@ -0,0 +1,4 @@
+<pre>
+{{ page.content }}
+</pre>
+

themes/lite/templates/projects.html

@@ -0,0 +1,36 @@
+{% extends "base.html" %}
+{% block meta %}
+{% endblock %}
+
+{% block style %}
+{% endblock %}
+
+{% block content %}
+Projects
+========
+
+My main hobby is working on software projects. I typically design websites or
+build tools that make my life easier. 
+
+<a href="https://news.t0.vc/" target="_blank" rel="noreferrer noopener">QotNews*</a> - <a class="source" href="https://git.tannercollin.com/tanner/qotnews" target="_blank" rel="noreferrer noopener">source code*</a>
+    Hacker News, Reddit, Lobsters, and Tildes articles pre-rendered in reader mode.
+    Optimized for speed and distraction-free reading.
+
+<a href="https://notica.us" target="_blank" rel="noreferrer noopener">Notica*</a> - <a class="source" href="https://github.com/tannercollin/Notica" target="_blank" rel="noreferrer noopener">source code*</a>
+    Send browser notifications from your terminal. No installation. No registration.
+
+<a href="https://my.protospace.ca" target="_blank" rel="noreferrer noopener">Spaceport*</a> - <a class="source" href="https://github.com/Protospace/spaceport" target="_blank" rel="noreferrer noopener">source code*</a>
+    Makerspace members' portal for Calgary Protospace. It tracks membership,
+    courses, training, access cards, and more.
+
+<a href="https://txt.t0.vc" target="_blank" rel="noreferrer noopener">t0txt*</a> - <a class="source" href="https://github.com/tannercollin/t0txt" target="_blank" rel="noreferrer noopener">source code*</a>
+    Minimal command line pastebin. Allows you to upload text notes from a bash pipe
+    or web browser.
+
+<a href="https://github.com/tannercollin/standardnotes-fs" target="_blank" rel="noreferrer noopener">standardnotes-fs*</a>
+    A filesystem that mounts your Standard Notes account as a directory of text
+    files that you can edit.
+
+* external link
+{% endblock %}
+

themes/lite/templates/writing.html

@@ -0,0 +1,28 @@
+{% extends "base.html" %}
+{% block meta %}
+{% endblock %}
+
+{% block style %}
+{% endblock %}
+
+{% block content %}
+Writing
+=======
+
+Various articles, mostly about computers.
+
+{% for article in articles if article.category.name == 'Writing' %}
+<a href="/{{ article.url }}">{{ article.title }}</a>
+    {{ article.summary | striptags }}
+
+{% endfor %}
+
+Text Files
+----------
+
+Here are some random text notes that I share with the public.
+
+{% for f in list_text_files() %}
+<a href="../text/{{ f }}">{{ f }}</a>
+{% endfor %}
+{% endblock %}

themes/theme/templates/article.html

@@ -27,7 +27,7 @@
 {% block info %}
 	Tanner Collin
 	<p class="contact-icons">
-		<a href="mailto:site2@tannercollin.com" rel="noreferrer noopener"><img alt="email" src="/theme/mail.svg" width="20" height="20" /></a>
+		<a href="mailto:site4@tannercollin.com" rel="noreferrer noopener"><img alt="email" src="/theme/mail.svg" width="20" height="20" /></a>
 		<a href="https://t.me/tannercollin" target="_blank" rel="noreferrer noopener"><img alt="telegram" src="/theme/telegram.svg" width="20" height="20" /></a>
 		<a href="https://github.com/tannercollin" target="_blank" rel="noreferrer noopener"><img alt="github" src="/theme/github.svg" width="20" height="20" /></a>
 	</p>

themes/theme/templates/base.html

@@ -1,12 +1,3 @@
-{% if PROD %}
-<?php
-	$themeClass = '';
-	if (!empty($_COOKIE['theme'])) {
-		$themeClass = $_COOKIE['theme'];
-	}
-?>
-{% endif %}
-
 <!DOCTYPE html>
 <html lang="en">
 	<head>
@@ -18,21 +9,10 @@
 		<meta name="author" content="{{ AUTHOR }}" />
 		{% endblock head %}
 
-		<link rel="preload" href="/theme/fonts/AppSILB.ttf" as="font" type="font/ttf" crossorigin="anonymous">
-		<link rel="preload" href="/theme/fonts/AppSILBI.ttf" as="font" type="font/ttf" crossorigin="anonymous">
-		<link rel="preload" href="/theme/fonts/AppSILI.ttf" as="font" type="font/ttf" crossorigin="anonymous">
-		<link rel="preload" href="/theme/fonts/AppSILR.ttf" as="font" type="font/ttf" crossorigin="anonymous">
-
-		<link rel="preload" href="/theme/fonts/Lato-Bold.ttf" as="font" type="font/ttf" crossorigin="anonymous">
-		<link rel="preload" href="/theme/fonts/Lato-BoldItalic.ttf" as="font" type="font/ttf" crossorigin="anonymous">
-		<link rel="preload" href="/theme/fonts/Lato-Italic.ttf" as="font" type="font/ttf" crossorigin="anonymous">
-		<link rel="preload" href="/theme/fonts/Lato-Regular.ttf" as="font" type="font/ttf" crossorigin="anonymous">
-
 		<link rel="icon" href="favicon.svg">
 
 		<style>
 		{% include 'style.css' %}
-		{% include 'fonts.css' %}
 		</style>
 
 		<script defer src="/theme/instant-page.js"></script>
@@ -49,7 +29,10 @@
 			{% endblock %}
 		</div>
 
-		<p class="copyright">
+		<p class="footer">
+			<span class="wname">Webring:</span> <a href="https://jason.schwarzenberger.co.nz/" class="wprev">&lt; Previous</a> | <a href="https://webring.t0.vc" class="windex">Index</a> | <a href="https://udia.ca" class="wnext">Next &gt;</a>
+		</p>
+		<p class="footer">
 			© 2012–2021 Tanner Collin
 		</p>
 	</body>

themes/theme/templates/creations.html

@@ -0,0 +1,10 @@
+{% extends "base.html" %}
+{% block meta %}
+{% endblock %}
+
+{% block style %}
+{% endblock %}
+
+{% block content %}
+Nothing to see here...
+{% endblock %}

themes/theme/templates/fonts.css

@@ -1,59 +0,0 @@
-@font-face {
-	font-family: 'Apparatus SIL';
-	src: url('/theme/fonts/AppSILR.ttf') format('truetype');
-	font-display: swap;
-}
-
-@font-face {
-	font-family: 'Apparatus SIL';
-	font-style: italic;
-	src: url('/theme/fonts/AppSILI.ttf') format('truetype');
-	font-display: swap;
-}
-
-@font-face {
-	font-family: 'Apparatus SIL';
-	font-weight: bold;
-	src: url('/theme/fonts/AppSILB.ttf') format('truetype');
-	font-display: swap;
-}
-
-@font-face {
-	font-family: 'Apparatus SIL';
-	font-weight: bold;
-	font-style: italic;
-	src: url('/theme/fonts/AppSILBI.ttf') format('truetype');
-	font-display: swap;
-}
-
-@font-face {
-	font-family: 'Lato';
-	font-style: italic;
-	font-weight: 400;
-	src: local('Lato Italic'), local('Lato-Italic'), url('/theme/fonts/Lato-Italic.ttf') format('truetype');
-	font-display: swap;
-}
-
-@font-face {
-	font-family: 'Lato';
-	font-style: italic;
-	font-weight: 700;
-	src: local('Lato Bold Italic'), local('Lato-BoldItalic'), url('/theme/fonts/Lato-BoldItalic.ttf') format('truetype');
-	font-display: swap;
-}
-
-@font-face {
-	font-family: 'Lato';
-	font-style: normal;
-	font-weight: 400;
-	src: local('Lato Regular'), local('Lato-Regular'), url('/theme/fonts/Lato-Regular.ttf') format('truetype');
-	font-display: swap;
-}
-
-@font-face {
-	font-family: 'Lato';
-	font-style: normal;
-	font-weight: 700;
-	src: local('Lato Bold'), local('Lato-Bold'), url('/theme/fonts/Lato-Bold.ttf') format('truetype');
-	font-display: swap;
-}

themes/theme/templates/index.html

@@ -8,11 +8,16 @@
 {% endblock %}
 
 {% block info %}
-	<img src="/theme/me.jpg" width="128" class="me" alt="me smiling wide and looking into the camera lit up brightly" />
+	<picture>
+		<source type="image/webp" srcset="/theme/me.webp">
+		<source type="image/jpeg" srcset="/theme/me.jpg">
+		<img src="/theme/me.jpg" width="128" height="164" class="me" alt="me smiling wide and looking into the camera lit up brightly">
+	</picture>
+
 	<div class="info">
 		<h1>Tanner Collin</h1>
 		<p class="contact-icons">
-			<a href="mailto:site2@tannercollin.com" rel="noreferrer noopener"><img alt="email" src="/theme/mail.svg" width="20" height="20" /></a>
+			<a href="mailto:site4@tannercollin.com" rel="noreferrer noopener"><img alt="email" src="/theme/mail.svg" width="20" height="20" /></a>
 			<a href="https://t.me/tannercollin" target="_blank" rel="noreferrer noopener"><img alt="telegram" src="/theme/telegram.svg" width="20" height="20" /></a>
 			<a href="https://github.com/tannercollin" target="_blank" rel="noreferrer noopener"><img alt="github" src="/theme/github.svg" width="20" height="20" /></a>
 		</p>
@@ -20,103 +25,94 @@
 {% endblock %}
 
 {% block content %}
-	<div class="content content-index">
+	<div class="content index">
 		<p>
 			Hi, I'm Tanner! I do firmware and web development in Calgary.
 		</p>
 
-		<div class="leftcol">
-		<div class="inside">
+		<h2>Contact Info</h2>
 
-			<h2>Contact Info</h2>
+		<p>
+			Email: <a href="mailto:site4@tannercollin.com">site4@tannercollin.com</a> <br />
+			Telegram: <a href="https://t.me/tannercollin" target="_blank" rel="noreferrer noopener">@tannercollin</a>
+		</p>
 
-			<p>
-				Email: <a href="mailto:site2@tannercollin.com">site2@tannercollin.com</a> <br />
-				Telegram: <a href="https://t.me/tannercollin" target="_blank" rel="noreferrer noopener">@tannercollin</a>
-			</p>
+		<h2>Resume</h2>
 
-			<h2>Resume</h2>
+		<ul>
+			<li>Firmware Engineer at <a href="https://cabanablockchain.com" target="_blank" rel="noreferrer noopener">Cabana Blockchain</a>, 2018–</li>
+			<li>Lead Hardware Engineer at <a href="https://criticalcontrol.com/" target="_blank" rel="noreferrer noopener">Critical Control</a>, 2016–2018</li>
+			<li>Electrical Engineer at <a href="https://www.opener.aero/" target="_blank" rel="noreferrer noopener">Opener Aero</a>, 2016–2016</li>
+			<li>Electrical Engineer Intern at <a href="https://www.pason.com/" target="_blank" rel="noreferrer noopener">Pason Systems</a>, 2014–2015</li>
+			<li>BSc. Electrical Engineering from University of Calgary</li>
+		</ul>
 
-			<ul>
-				<li>Firmware Engineer at <a href="https://cabanablockchain.com" target="_blank" rel="noreferrer noopener">Cabana Blockchain</a>, 2018–</li>
-				<li>Lead Hardware Engineer at <a href="https://criticalcontrol.com/" target="_blank" rel="noreferrer noopener">Critical Control</a>, 2016–2018</li>
-				<li>Electrical Engineer at <a href="https://www.opener.aero/" target="_blank" rel="noreferrer noopener">Opener Aero</a>, 2016–2016</li>
-				<li>Electrical Engineer Intern at <a href="https://www.pason.com/" target="_blank" rel="noreferrer noopener">Pason Systems</a>, 2014–2015</li>
-				<li>BSc. Electrical Engineering from University of Calgary</li>
-			</ul>
+		<h2>Projects</h2>
 
-			<h2>Projects</h2>
+		<p>
+			My main hobby is working on software projects. I typically design websites or
+			build tools that make my life easier.
+		</p>
 
-			<p>
-				My main hobby is working on software projects. I typically design websites or
-				build tools that make my life easier.
-			</p>
-
-			<h3>
-				<a href="https://news.t0.vc/" target="_blank" rel="noreferrer noopener">QotNews</a>
-				— <a class="source" href="https://git.tannercollin.com/tanner/qotnews" target="_blank" rel="noreferrer noopener">source code</a>
-			</h3>
-			<div class="summary">
-				<p>Hacker News, Reddit, Lobsters, and Tildes articles pre-rendered in reader mode. Optimized for speed and distraction-free reading.</p>
-			</div>
-
-			<h3>
-				<a href="https://notica.us" target="_blank" rel="noreferrer noopener">Notica</a>
-				— <a class="source" href="https://github.com/tannercollin/Notica" target="_blank" rel="noreferrer noopener">source code</a>
-			</h3>
-			<div class="summary">
-				<p>Send browser notifications from your terminal. No installation. No registration.</p>
-			</div>
-
-			<h3>
-				<a href="https://my.protospace.ca" target="_blank" rel="noreferrer noopener">Spaceport</a>
-				— <a class="source" href="https://github.com/Protospace/spaceport" target="_blank" rel="noreferrer noopener">source code</a>
-			</h3>
-			<div class="summary">
-				<p>Makerspace members' portal for Calgary Protospace. It tracks membership, courses, training, access cards, and more.</p>
-			</div>
-
-			<h3>
-				<a href="https://txt.t0.vc" target="_blank" rel="noreferrer noopener">t0txt</a>
-				— <a class="source" href="https://github.com/tannercollin/t0txt" target="_blank" rel="noreferrer noopener">source code</a>
-			</h3>
-			<div class="summary">
-				<p>Minimal command line pastebin. Allows you to upload text notes from a bash pipe or web browser.</p>
-			</div>
-
-			<h3>
-				<a href="https://github.com/tannercollin/standardnotes-fs" target="_blank" rel="noreferrer noopener">standardnotes-fs</a>
-			</h3>
-			<div class="summary">
-				<p>A filesystem that mounts your Standard Notes account as a directory of text files that you can edit.</p>
-			</div>
-		</div>
+		<h3>
+			<a href="https://news.t0.vc/" target="_blank" rel="noreferrer noopener">QotNews</a>
+			— <a class="source" href="https://git.tannercollin.com/tanner/qotnews" target="_blank" rel="noreferrer noopener">source code</a>
+		</h3>
+		<div class="summary">
+			<p>Hacker News, Reddit, Lobsters, and Tildes articles pre-rendered in reader mode. Optimized for speed and distraction-free reading.</p>
 		</div>
 
-		<div class="rightcol">
-		<div class="inside">
-			<h2>Creations</h2>
-
-			<p>Sometimes I create art or interactive tech.</p>
-
-			{% for article in articles_page.object_list if article.category.name == 'Projects' %}
-				<h3><a href="{{ article.url }}">{{ article.title }}</a></h3>
-				<div class="summary">
-					{{ article.summary }}
-				</div>
-			{% endfor %}
-
-			<h2>Writing</h2>
-
-			<p>Various articles, mostly about computers.</p>
-
-			{% for article in articles_page.object_list if article.category.name == 'Writing' %}
-				<h3><a href="{{ article.url }}">{{ article.title }}</a></h3>
-				<div class="summary">
-					{{ article.summary }}
-				</div>
-			{% endfor %}
+		<h3>
+			<a href="https://notica.us" target="_blank" rel="noreferrer noopener">Notica</a>
+			— <a class="source" href="https://github.com/tannercollin/Notica" target="_blank" rel="noreferrer noopener">source code</a>
+		</h3>
+		<div class="summary">
+			<p>Send browser notifications from your terminal. No installation. No registration.</p>
 		</div>
+
+		<h3>
+			<a href="https://my.protospace.ca" target="_blank" rel="noreferrer noopener">Spaceport</a>
+			— <a class="source" href="https://github.com/Protospace/spaceport" target="_blank" rel="noreferrer noopener">source code</a>
+		</h3>
+		<div class="summary">
+			<p>Makerspace members' portal for Calgary Protospace. It tracks membership, courses, training, access cards, and more.</p>
 		</div>
+
+		<h3>
+			<a href="https://txt.t0.vc" target="_blank" rel="noreferrer noopener">t0txt</a>
+			— <a class="source" href="https://github.com/tannercollin/t0txt" target="_blank" rel="noreferrer noopener">source code</a>
+		</h3>
+		<div class="summary">
+			<p>Minimal command line pastebin. Allows you to upload text notes from a bash pipe or web browser.</p>
+		</div>
+
+		<h3>
+			<a href="https://github.com/tannercollin/standardnotes-fs" target="_blank" rel="noreferrer noopener">standardnotes-fs</a>
+		</h3>
+		<div class="summary">
+			<p>A filesystem that mounts your Standard Notes account as a directory of text files that you can edit.</p>
+		</div>
+
+		<h2>Creations</h2>
+
+		<p>Sometimes I create art or interactive tech.</p>
+
+		{% for article in articles_page.object_list if article.category.name == 'Creations' %}
+			<h3><a href="{{ article.url }}">{{ article.title }}</a></h3>
+			<div class="summary">
+				{{ article.summary }}
+			</div>
+		{% endfor %}
+
+		<h2>Writing</h2>
+
+		<p>Various articles, mostly about computers.</p>
+
+		{% for article in articles_page.object_list if article.category.name == 'Writing' %}
+			<h3><a href="{{ article.url }}">{{ article.title }}</a></h3>
+			<div class="summary">
+				{{ article.summary }}
+			</div>
+		{% endfor %}
 	</div>
 {% endblock %}

themes/theme/templates/projects.html

@@ -0,0 +1,10 @@
+{% extends "base.html" %}
+{% block meta %}
+{% endblock %}
+
+{% block style %}
+{% endblock %}
+
+{% block content %}
+Nothing to see here...
+{% endblock %}

themes/theme/templates/style.css

@@ -4,7 +4,7 @@ html {
 
 body {
 	text-rendering: optimizeLegibility;
-	font: 1.2rem/1.0 Lato,sans-serif;
+	font: 1.1rem/1.0 sans-serif;
 }
 
 a {
@@ -13,22 +13,27 @@ a {
 }
 
 .info h1 {
-	font: 1.2rem/1.0 Lato,sans-serif;
+	font: 1.1rem/1.0 sans-serif;
+}
+
+.index h3 {
+	font: 1.1rem/1.5 serif;
 }
 
 .source {
-	font: 1rem/1.5 Apparatus SIL,serif;
+	font: 0.9rem/1.5 serif;
 }
 
 pre {
-	font-size: 1rem;
+	font-size: 0.9rem;
+	line-height: 1.2;
 	padding: 1rem;
 	overflow-x: auto;
 }
 
 :not(pre)>code {
 	padding: 0 2px;
-	font-size: 0.9rem;
+	font-size: 0.8rem;
 }
 
 .container {
@@ -36,8 +41,8 @@ pre {
 	margin: 2rem auto 12rem auto;
 }
 
-.copyright {
-	font: 1rem/1.5 Apparatus SIL,serif;
+.footer {
+	font: 0.9rem/1.5 serif;
 	text-align: center;
 }
 
@@ -58,14 +63,13 @@ pre {
 }
 
 .content p.metadata {
-	font: 1rem/1.0 Apparatus SIL,serif;
+	font: 0.9rem/1.0 serif;
 	font-style: italic;
 }
 
 .content div.summary p {
 	margin-top: -0.5rem;
-	margin-left: 1rem;
-	font-style: italic;
+	margin-left: 1.5rem;
 }
 
 .content {
@@ -73,19 +77,11 @@ pre {
 }
 
 .content-wide {
-	max-width: 46rem;;
-}
-
-.content-index {
 	max-width: none;
 }
 
-.content-index h3 {
-	font: 1.2rem/1.5 Apparatus SIL,serif;
-}
-
 .content p {
-	font: 1.2rem/1.5 Apparatus SIL,serif;
+	font: 1.1rem/1.5 serif;
 }
 
 .content ul {
@@ -93,7 +89,7 @@ pre {
 }
 
 .content li {
-	font: 1.2rem/1.5 Apparatus SIL,serif;
+	font: 1.1rem/1.5 serif;
 }
 
 .content img {
@@ -107,7 +103,7 @@ pre {
 	position: relative;
 	width: 8rem;
 	margin-left: -9rem;
-	font-size: 1rem;
+	font-size: 0.9rem;
 }
 
 .toclink:not(:hover) {
@@ -183,30 +179,6 @@ pre {
 	}
 }
 
-@media screen and (min-width:58rem) {
-	.container {
-		max-width: 75rem;
-	}
-
-	.leftcol {
-		float: left;
-		width: 50%;
-		margin-top: -1rem;
-	}
-
-	.leftcol > .inside {
-		padding-right: 1rem;
-	}
-
-	.rightcol {
-		overflow: hidden;
-		margin-top: -1rem;
-	}
-
-	.rightcol > .inside {
-		padding-left: 1rem;
-	}
-}
 
 body {
 	background-color: #eee;

themes/theme/templates/writing.html

@@ -0,0 +1,10 @@
+{% extends "base.html" %}
+{% block meta %}
+{% endblock %}
+
+{% block style %}
+{% endblock %}
+
+{% block content %}
+Nothing to see here...
+{% endblock %}