You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
52 lines
1.7 KiB
52 lines
1.7 KiB
2 years ago
|
/*
|
||
|
Example using the SparkFun HX711 breakout board with a scale
|
||
|
By: Nathan Seidle
|
||
|
SparkFun Electronics
|
||
|
Date: November 19th, 2014
|
||
|
License: This code is public domain but you buy me a beer if you use this and we meet someday (Beerware license).
|
||
|
|
||
|
This example demonstrates basic scale output. See the calibration sketch to get the calibration_factor for your
|
||
|
specific load cell setup.
|
||
|
|
||
|
This example code uses bogde's excellent library: https://github.com/bogde/HX711
|
||
|
bogde's library is released under a GNU GENERAL PUBLIC LICENSE
|
||
|
|
||
|
The HX711 does one thing well: read load cells. The breakout board is compatible with any wheat-stone bridge
|
||
|
based load cell which should allow a user to measure everything from a few grams to tens of tons.
|
||
|
Arduino pin 2 -> HX711 CLK
|
||
|
3 -> DAT
|
||
|
5V -> VCC
|
||
|
GND -> GND
|
||
|
|
||
|
The HX711 board can be powered from 2.7V to 5V so the Arduino 5V power should be fine.
|
||
|
|
||
|
*/
|
||
|
|
||
|
#include "HX711.h"
|
||
|
|
||
|
#define calibration_factor -10160.0 //This value is obtained using the SparkFun_HX711_Calibration sketch
|
||
|
|
||
|
#define DOUT 3
|
||
|
#define CLK 2
|
||
|
|
||
|
HX711 scale;
|
||
|
|
||
|
void setup() {
|
||
|
Serial.begin(9600);
|
||
|
Serial.println("HX711 scale demo");
|
||
|
|
||
|
scale.begin(DOUT, CLK);
|
||
|
scale.set_scale(calibration_factor); //This value is obtained by using the SparkFun_HX711_Calibration sketch
|
||
|
scale.tare(); //Assuming there is no weight on the scale at start up, reset the scale to 0
|
||
|
|
||
|
Serial.println("Readings:");
|
||
|
}
|
||
|
|
||
|
void loop() {
|
||
|
//Serial.print("Reading: ");
|
||
|
//Serial.print(scale.get_units(), 1); //scale.get_units() returns a float
|
||
|
//Serial.print(" lbs"); //You can change this to kg but you'll need to refactor the calibration_factor
|
||
|
//Serial.println();
|
||
|
Serial.println(scale.get_units(), 1);
|
||
|
}
|