Set JLCPCB constraints

dsc-arduino-interface.kicad_pcb

@@ -1,2 +1,92 @@
 (kicad_pcb (version 20211014) (generator pcbnew)
-)
+
+  (general
+    (thickness 1.6)
+  )
+
+  (paper "A4")
+  (layers
+    (0 "F.Cu" signal)
+    (31 "B.Cu" signal)
+    (32 "B.Adhes" user "B.Adhesive")
+    (33 "F.Adhes" user "F.Adhesive")
+    (34 "B.Paste" user)
+    (35 "F.Paste" user)
+    (36 "B.SilkS" user "B.Silkscreen")
+    (37 "F.SilkS" user "F.Silkscreen")
+    (38 "B.Mask" user)
+    (39 "F.Mask" user)
+    (40 "Dwgs.User" user "User.Drawings")
+    (41 "Cmts.User" user "User.Comments")
+    (42 "Eco1.User" user "User.Eco1")
+    (43 "Eco2.User" user "User.Eco2")
+    (44 "Edge.Cuts" user)
+    (45 "Margin" user)
+    (46 "B.CrtYd" user "B.Courtyard")
+    (47 "F.CrtYd" user "F.Courtyard")
+    (48 "B.Fab" user)
+    (49 "F.Fab" user)
+    (50 "User.1" user)
+    (51 "User.2" user)
+    (52 "User.3" user)
+    (53 "User.4" user)
+    (54 "User.5" user)
+    (55 "User.6" user)
+    (56 "User.7" user)
+    (57 "User.8" user)
+    (58 "User.9" user)
+  )
+
+  (setup
+    (stackup
+      (layer "F.SilkS" (type "Top Silk Screen"))
+      (layer "F.Paste" (type "Top Solder Paste"))
+      (layer "F.Mask" (type "Top Solder Mask") (thickness 0.01))
+      (layer "F.Cu" (type "copper") (thickness 0.035))
+      (layer "dielectric 1" (type "core") (thickness 1.51) (material "FR4") (epsilon_r 4.5) (loss_tangent 0.02))
+      (layer "B.Cu" (type "copper") (thickness 0.035))
+      (layer "B.Mask" (type "Bottom Solder Mask") (thickness 0.01))
+      (layer "B.Paste" (type "Bottom Solder Paste"))
+      (layer "B.SilkS" (type "Bottom Silk Screen"))
+      (copper_finish "None")
+      (dielectric_constraints no)
+    )
+    (pad_to_mask_clearance 0)
+    (pcbplotparams
+      (layerselection 0x00010fc_ffffffff)
+      (disableapertmacros false)
+      (usegerberextensions false)
+      (usegerberattributes true)
+      (usegerberadvancedattributes true)
+      (creategerberjobfile true)
+      (svguseinch false)
+      (svgprecision 6)
+      (excludeedgelayer true)
+      (plotframeref false)
+      (viasonmask false)
+      (mode 1)
+      (useauxorigin false)
+      (hpglpennumber 1)
+      (hpglpenspeed 20)
+      (hpglpendiameter 15.000000)
+      (dxfpolygonmode true)
+      (dxfimperialunits true)
+      (dxfusepcbnewfont true)
+      (psnegative false)
+      (psa4output false)
+      (plotreference true)
+      (plotvalue true)
+      (plotinvisibletext false)
+      (sketchpadsonfab false)
+      (subtractmaskfromsilk false)
+      (outputformat 1)
+      (mirror false)
+      (drillshape 1)
+      (scaleselection 1)
+      (outputdirectory "")
+    )
+  )
+
+  (net 0 "")
+
+)

dsc-arduino-interface.kicad_pro

@@ -2,26 +2,133 @@
   "board": {
     "design_settings": {
       "defaults": {
-        "board_outline_line_width": 0.1,
+        "board_outline_line_width": 0.09999999999999999,
-        "copper_line_width": 0.2,
+        "copper_line_width": 0.19999999999999998,
+        "copper_text_italic": false,
         "copper_text_size_h": 1.5,
         "copper_text_size_v": 1.5,
         "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.049999999999999996,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": false,
+          "text_position": 0,
+          "units_format": 1
+        },
+        "fab_line_width": 0.09999999999999999,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
         "other_line_width": 0.15,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 0.762,
+          "height": 1.524,
+          "width": 1.524
+        },
         "silk_line_width": 0.15,
+        "silk_text_italic": false,
         "silk_text_size_h": 1.0,
         "silk_text_size_v": 1.0,
-        "silk_text_thickness": 0.15
+        "silk_text_thickness": 0.15,
+        "silk_text_upright": false,
+        "zones": {
+          "45_degree_only": false,
+          "min_clearance": 0.508
+        }
       },
-      "diff_pair_dimensions": [],
+      "diff_pair_dimensions": [
+        {
+          "gap": 0.0,
+          "via_gap": 0.0,
+          "width": 0.0
+        }
+      ],
       "drc_exclusions": [],
-      "rules": {
+      "meta": {
-        "min_copper_edge_clearance": 0.0,
+        "version": 2
-        "solder_mask_clearance": 0.0,
-        "solder_mask_min_width": 0.0
       },
-      "track_widths": [],
+      "rule_severities": {
-      "via_dimensions": []
+        "annular_width": "error",
+        "clearance": "error",
+        "copper_edge_clearance": "error",
+        "courtyards_overlap": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint_type_mismatch": "error",
+        "hole_clearance": "error",
+        "hole_near_hole": "error",
+        "invalid_outline": "error",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "error",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_dangling": "warning",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zone_has_empty_net": "error",
+        "zones_intersect": "error"
+      },
+      "rules": {
+        "allow_blind_buried_vias": false,
+        "allow_microvias": false,
+        "max_error": 0.005,
+        "min_clearance": 0.127,
+        "min_copper_edge_clearance": 0.0,
+        "min_hole_clearance": 0.254,
+        "min_hole_to_hole": 0.5,
+        "min_microvia_diameter": 0.19999999999999998,
+        "min_microvia_drill": 0.09999999999999999,
+        "min_silk_clearance": 0.0,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.127,
+        "min_via_annular_width": 0.13,
+        "min_via_diameter": 0.3,
+        "solder_mask_clearance": 0.0,
+        "solder_mask_min_width": 0.0,
+        "use_height_for_length_calcs": true
+      },
+      "track_widths": [
+        0.0
+      ],
+      "via_dimensions": [
+        {
+          "diameter": 0.0,
+          "drill": 0.0
+        }
+      ],
+      "zones_allow_external_fillets": false,
+      "zones_use_no_outline": true
     },
     "layer_presets": []
   },