Go to file
2023-09-03 03:07:12 +01:00
.gitignore Authenticate with portal to get list of cards 2020-02-27 23:07:48 +00:00
LICENSE Initial commit 2020-02-19 17:12:56 -07:00
main.py Deploy to RPi 4 2023-09-03 03:07:12 +01:00
README.md Deploy to RPi 4 2023-09-03 03:07:12 +01:00
requirements.txt Freeze requirements 2020-02-19 17:47:40 -07:00
secrets.py.example Make specific to Fuse33 / Fabman 2023-08-29 17:02:28 -06:00

Airlock

Door controller for scanning Fuse33 member cards on the front and back doors.

Setup

Install dependencies:

$ sudo apt update
$ sudo apt install python3 python3-pip python3-virtualenv supervisor git

Clone this repo:

$ git clone https://github.com/Protospace/airlock.git
$ sudo mv airlock/ /opt/
$ cd /opt/airlock

Hardware Access

Ensure Pi user has read permissions to /dev/ttyACA0 and /dev/watchdog.

Configure /etc/udev/rules.d/local.rules:

ACTION=="add", KERNEL=="dialout", MODE="0666"
ACTION=="add", KERNEL=="ttyACM0", MODE="0666"
ACTION=="add", KERNEL=="ttyAMA0", MODE="0666"
KERNEL=="watchdog", MODE="0666"

Also ensure /boot/cmdline.txt doesn't contain console=serial0,115200.

On Raspberry Pi 4, you may need to add this to the end of '/boot/config.txt, after [all]`:

enable_uart=1
dtoverlay=disable-bt

Then reboot:

$ sudo reboot

Main Script

Create a venv, activate it, and install:

$ virtualenv -p python3 env
$ source env/bin/activate
(env) $ pip install -r requirements.txt

Start an empty card_data.json:

(env) $ echo "{}" > card_data.json

Now you can run the script to test:

(env) $ DEBUG=true python main.py

Copy and edit the settings file:

(env) $ cp secrets.py.example secrets.py
(env) $ vim secrets.py

Process management

The script is kept alive with supervisor.

Configure /etc/supervisor/conf.d/airlock.conf:

[program:airlock]
user=pi
directory=/opt/airlock
command=/opt/airlock/env/bin/python -u main.py
stopasgroup=true
stopsignal=INT
autostart=true
autorestart=true
stderr_logfile=/var/log/airlock.log
stderr_logfile_maxbytes=10MB
stdout_logfile=/var/log/airlock.log
stdout_logfile_maxbytes=10MB

Run sudo supervisorctl reread; sudo supervisorctl update to deploy.

Script logs to /var/log/airlock.log. Remove -u from the above command when you're done testing.

License

This program is free and open-source software licensed under the MIT License. Please see the LICENSE file for details.

That means you have the right to study, change, and distribute the software and source code to anyone and for any purpose. You deserve these rights.