You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
94 lines
2.4 KiB
94 lines
2.4 KiB
// Feather9x_RX |
|
// -*- mode: C++ -*- |
|
// Example sketch showing how to create a simple messaging client (receiver) |
|
// with the RH_RF95 class. RH_RF95 class does not provide for addressing or |
|
// reliability, so you should only use RH_RF95 if you do not need the higher |
|
// level messaging abilities. |
|
// It is designed to work with the other example Feather9x_TX |
|
|
|
#include <SPI.h> |
|
#include <RH_RF95.h> |
|
|
|
#define RFM95_CS 8 |
|
#define RFM95_RST 4 |
|
#define RFM95_INT 3 |
|
|
|
// Change to 434.0 or other frequency, must match RX's freq! |
|
#define RF95_FREQ 900.0 |
|
|
|
// Singleton instance of the radio driver |
|
RH_RF95 rf95(RFM95_CS, RFM95_INT); |
|
|
|
// Blinky on receipt |
|
#define LED 13 |
|
|
|
void setup() |
|
{ |
|
pinMode(LED, OUTPUT); |
|
pinMode(RFM95_RST, OUTPUT); |
|
digitalWrite(RFM95_RST, HIGH); |
|
|
|
Serial.begin(115200); |
|
|
|
delay(1000); |
|
|
|
Serial.println("Feather LoRa RX Test!"); |
|
|
|
// manual reset |
|
digitalWrite(RFM95_RST, LOW); |
|
delay(10); |
|
digitalWrite(RFM95_RST, HIGH); |
|
delay(10); |
|
|
|
while (!rf95.init()) { |
|
Serial.println("LoRa radio init failed"); |
|
Serial.println("Uncomment '#define SERIAL_DEBUG' in RH_RF95.cpp for detailed debug info"); |
|
while (1); |
|
} |
|
Serial.println("LoRa radio init OK!"); |
|
|
|
// Defaults after init are 434.0MHz, modulation GFSK_Rb250Fd250, +13dbM |
|
if (!rf95.setFrequency(RF95_FREQ)) { |
|
Serial.println("setFrequency failed"); |
|
while (1); |
|
} |
|
Serial.print("Set Freq to: "); Serial.println(RF95_FREQ); |
|
|
|
// Defaults after init are 434.0MHz, 13dBm, Bw = 125 kHz, Cr = 4/5, Sf = 128chips/symbol, CRC on |
|
|
|
// The default transmitter power is 13dBm, using PA_BOOST. |
|
// If you are using RFM95/96/97/98 modules which uses the PA_BOOST transmitter pin, then |
|
// you can set transmitter powers from 5 to 23 dBm: |
|
//rf95.setTxPower(23, false); |
|
} |
|
|
|
void loop() |
|
{ |
|
if (rf95.available()) |
|
{ |
|
// Should be a message for us now |
|
uint8_t buf[RH_RF95_MAX_MESSAGE_LEN]; |
|
uint8_t len = sizeof(buf); |
|
|
|
if (rf95.recv(buf, &len)) |
|
{ |
|
digitalWrite(LED, HIGH); |
|
RH_RF95::printBuffer("Received: ", buf, len); |
|
Serial.print("Got: "); |
|
Serial.println((char*)buf); |
|
Serial.print("RSSI: "); |
|
Serial.println(rf95.lastRssi(), DEC); |
|
|
|
// Send a reply |
|
uint8_t data[] = "And hello back to you"; |
|
rf95.send(data, sizeof(data)); |
|
rf95.waitPacketSent(); |
|
Serial.println("Sent a reply"); |
|
digitalWrite(LED, LOW); |
|
} |
|
else |
|
{ |
|
Serial.println("Receive failed"); |
|
} |
|
} |
|
}
|
|
|